Straightforward electric option
MD Heating Mats
Pre-spaced electric heating mats for regular-shaped tiled or stone floors, available in different outputs to suit the room design.
Currently closed
Room guide
Conservatories and garden rooms can have higher heat loss than the rest of the home. Start with the floor construction, usable heated area and a calculated room heat loss.
Choose the right route
Tile and stone generally transfer heat effectively, but conservatories can be demanding spaces. The final output must be checked against glazing, insulation and calculated heat loss.
Straightforward electric option
Pre-spaced electric heating mats for regular-shaped tiled or stone floors, available in different outputs to suit the room design.
Flexible electric option
A loose heating cable for awkward layouts, curved edges and floor areas where a pre-spaced mat is less practical.
New-build route
For a new conservatory or garden room with a new slab and screed, a designed water system can form part of the floor construction.
| Comparison criteria | MD Mats | UltraTec | Water Heating |
|---|---|---|---|
| Starting point | Regular, open floor areas | Irregular or detailed layouts | New slab and screed construction |
| System position | Beneath compatible tile or stone finishes | Within the specified tiled-floor build-up | Pipe embedded within the screed |
| Main priority | Fast installation and even coverage | Greater freedom over cable spacing | A whole-room system designed around heat loss |
Plan for a high-loss room
Large areas of glass can make a conservatory harder to heat. A room heat-loss calculation should confirm whether underfloor heating can provide the required output alone or should work with another heat source.
Account for glazing, external walls, orientation and the room's intended use
Confirm whether the floor is new screed, an existing base or another compatible build-up
Choose an approved finish and keep the complete floor covering within permitted thermal resistance
Match system output and thermostat control to the calculated heating requirement