FreezeTec 2 packaged cable
A pre-terminated pipe frost-protection cable with an integrated thermostat for compatible straightforward installations. Select the correct length and follow the current manual.
PIPE FROST PROTECTION
How to Stop Pipes Freezing
Use the correct trace-heating cable, insulation and control arrangement for the pipework and conditions.
This guide explains the planning route for protecting suitable pipes and valves from freezing without relying on outdated one-size-fits-all limits.
CHOOSE THE RIGHT CABLE TYPE
Packaged Cable or Project-Specific Trace Heating?
The correct route depends on pipe length, material, exposure, temperature and the number of branches or valves.
View FreezeTec 2
Self-regulating trace heating
For more involved pipe routes or project-specific applications using compatible cable, terminations, controls and accessories selected as a complete system.
INSTALLATION PLANNING
Four Steps Before the System Is Energised
The current product manual remains the controlling installation document.
Assess the pipework
Record the pipe material, outside diameter, length, valves, branches, ambient conditions and available electrical supply.
Select and position the cable
Use a cable approved for the application and arrange it only as permitted by the manual. Do not cut a fixed-length heating element.
Apply compatible insulation
Insulate the protected pipework using the specified type and thickness, while keeping thermostats and sensing positions correctly located.
Test, label and commission
Complete the required electrical tests, fit identification labels and verify the control operation before leaving the system in service.
THE HEATING CABLE
A Purpose-Designed Pipe Protection System
Use the product specified for the pipe material, diameter, insulation and exposure conditions.
FreezeTec 2 heating cable
A ready-made cable with thermostat for protecting suitable pipes, valves and water systems from freezing.
Protect the vulnerable length
Plan around the full exposed section, then fit the cable and insulation in accordance with the current manual.
SAFETY AND COMPATIBILITY
Check the Pipe, Insulation and Electrical System Together
Trace heating can be damaged or perform poorly if any part of the build-up is unsuitable.
Pipe compatibility
Confirm the cable and fixing method suit the pipe material and operating temperature.
Insulation compatibility
Use insulation approved for the pipe and trace-heating arrangement, including any required protective layers.
Electrical protection
Plan the supply, controls, circuit protection and final connection in accordance with applicable requirements.
COMMON QUESTIONS
Pipe Frost-Protection Questions
Important distinctions before selecting a cable.
Can I cut a FreezeTec cable to length?
Do not cut or shorten a fixed-length heating element. Select the correct product length and follow its current instructions.
Is insulation still required?
Trace heating and insulation normally work together. Use the insulation type and thickness specified for the product and design conditions.
Can the same cable be used on every pipe material?
No. Confirm product, fixing and temperature compatibility with the actual pipe material before installation.