Electric underfloor heating
The thermostat switches the electric heating load and normally uses a floor sensor. Check the supply voltage, total load and sensor compatibility for the exact model.
UNDERFLOOR HEATING CONTROLS
Heatmiser Thermostats and Controls
Choose controls to match the heating system, electrical supply and zoning design—not appearance alone.
This guide explains the main Heatmiser control routes for electric and water underfloor heating, with links to current products and manuals.
START WITH YOUR SYSTEM
Electric and Water Systems Need Different Controls
Identify the heating type first, then choose the control style and features you need.
Shop Electric Thermostats
Water underfloor heating
Room thermostats work with the wiring centre, actuators and heat source controls. Confirm whether the system is wired or wireless and how many zones are required.
CONTROL OPTIONS
Choose the Features That Suit the Project
Use this as a starting point, then check the product page and current manual before ordering.
| Control type | Best suited to | Where to start |
|---|---|---|
| Manual dial | Straightforward local temperature adjustment with minimal programming. | Manual thermostats |
| Programmable | Scheduled temperature control for regular daily or weekly routines. | Programmable thermostats |
| WiFi and app control | Remote access and scheduling where a compatible connected thermostat is preferred. | WiFi thermostats |
| Water-system zoning | Multi-zone water systems using compatible thermostats, wiring centres and actuators. | 230V and wireless water controls |
Manual dial
- Best suited to
- Straightforward local temperature adjustment with minimal programming.
- Where to start
- Manual thermostats
Programmable
- Best suited to
- Scheduled temperature control for regular daily or weekly routines.
- Where to start
- Programmable thermostats
WiFi and app control
- Best suited to
- Remote access and scheduling where a compatible connected thermostat is preferred.
- Where to start
- WiFi thermostats
Water-system zoning
- Best suited to
- Multi-zone water systems using compatible thermostats, wiring centres and actuators.
- Where to start
- 230V and wireless water controls
Product names and compatibility can change. Always confirm the exact model against the current Heatmiser documentation.
BEFORE YOU ORDER
Compatibility Comes Before Features
Controls are part of the electrical and hydraulic design. Check these points before choosing a model.
System and supply
Confirm electric or water heating, supply voltage and the control method required.
Load and zones
Check the connected load, number of rooms and any switching or wiring-centre requirements.
Sensors and accessories
Confirm floor sensors, receivers, actuators and other accessories are compatible with the chosen thermostat.
COMMON QUESTIONS
Heatmiser Control Questions
Useful checks before selecting or replacing a control.
Can I replace an old thermostat with any current model?
Not automatically. Check the supply voltage, switching method, sensor type, wiring and connected load before selecting a replacement.
Do electric and water underfloor heating use the same thermostat?
Some control ranges include models for different applications, but the installation and switching requirements differ. Choose a product specifically approved for the system.
Where can I find the wiring diagram?
Use the current manual for the exact thermostat or wiring-centre model in the Uheat Downloads Portal.